info@eilsystems.com
write to us
+39 041 307 2424
contact us
Menu
write to us
contact us
Towerlux HYBRID POWER only takes 15 seconds to install and switch on . HYBRID POWER has been designed to be installed by a single person without the use of any tools.
Developed with proprietary EILIGHT technology®
Latest generation LED technology
Diffuser in special anti-glare fabric
Forced air cooling
360° lighting for up to 10,000 square meters
Over 120,000 lm of perceived illumination
Only 15 seconds for commissioning
Nothing to assemble, no tools required
With Towerlux Hybrid Power, emergency lighting can now rely on the latest EILIGHT® technology, breaking down any operational limits.
With a battery life that can be configured as required and conventional power supply, Towerlux Hybrid Power is the ideal tool for every operating condition. The combination of efficiency, durability and reliability enables previously impossible results and efficient emergency management in simple as well as complex and extreme conditions.
Towerlux Hybrid Power once again enhances the level of safety by ensuring reliable operation when we need it most.
Outstanding autonomy: up to 16 hours of light
High security with explosion-proof batteries
Flicker free technology: maximum eye comfort
Over 120,000 lumens in battery mode
Hybrid power: battery and/or line power
Energy storage capacity of up to 8 KW/h
Full range voltage: from 36V DC to 240V AC
Aircraft-safe: suitable for air transport
Each EIL Systems product is the result of combining aircraft-derived technology and materials, innovative ideas and state-of-the-art LEDs.
DESIGNED TO LAST
The pillar supporting the light source is in four-layer laminar fabric. This gives Towerlux HYBRID POWER flexibility and maximum resistance to shocks and bad weather. It does not rust, it will not suffer any chemical, physical or chromatic alterations due to the UV rays emitted by the LEDs
Air-cooled high-power LED luminaire
Ground anchoring
bracing points
Support pillar in EILIGHT®
laminated fabric inflated, under
pressure to over 100 mb
ABS platform for housing support
column, turbines and controls
Power cable for 48V 110V 220V AC
lamp power supply and battery
charging
Fibreglass base for housing batteries
with a counterweight function stabiliser
HANDLING
The Towerlux HYBRID POWER light tower can be moved on the ground by a single operator. Even when switched on, it can be easily moved and placed in a position such as to accomodate the ever-changing specific local needs of use. In the presence of several Towerlux HYBRID POWER systems, optimal lighting condition for the area is reached in a short time
Weighing only 29 kg (in the 2-hour battery life version) a time required for commissioning of just 15 seconds, Towerlux HYBRID POWER has no competition at all.
The closed HYBRID POWER module has a total footprint of 62x46x62 cm, and is therefore easily transportable in a common utility car.
CES by EILIGHT® – Controlled Elevation System
Extension of the supporting structure of the EIL Systems-patented tower takes place vertically in progression, thanks to the presence of sectors divided into bulkheads, equipped with holes with variable diameter. This creates a pressure differential along the many sectors and over the structure’s vertical extension. Short lever arms allow for lifting of weight and reaching the operating quota in a few seconds.
CLS by EILIGHT® – Controlled Lowering System
The internal pressure reduction of an air-inflated tube results in collapse at the base and fall, with a lever arm so long as to compromise integrity of the light source. The EIL CLS system uses an elastic band applied at half height for inducing a controlled failure, so that the tower folds slowly and descends vertically without any damage-causing impact to the ground.
Plug cable connection for lamp power
supply with AC 48V 110V 220V and
battery charging
Valve opening rod for rapid
deflation of the supporting pillar
Supporting platform for the
load-bearing pillar
Spring handle for tandem
use and transport
Socket for one-person manual gripping
QR code link to the manuals area
Hook pins for closing the lid
Housing for inlet air vents
Fibreglass base for housing batteries
with a counterweight function stabiliser
Ignition, lifting and control switches
internal pressure and brightness in
FULL-POWER or ECO-POWER mode
Spring handle for tandem
use and transport
Socket for one-person
manual gripping
LCD display showing battery charge
level and absorption in operation
Over 40,000 hours of safe work for each need. Perceived lighting power of over 120,000 Lumens. Double control of optimal operating temperature of EILIGHT patented LEDs.
Range of use in environmental thermal conditions from -20° C to 40° C
Having a bright light reducing your field of vision due to dazzling serves little to no purpose. EIL Systems lighting products are powerful and anti-glare, as they are equipped with large light diffusion surfaces made of technological fabrics of premium quality and resistance. Ground operators will always be able to see each other, even when facing the light source on a straight line.
We managed to patent a special and unique LED operating temperature control system. We use part of the air produced to support HYBRID POWER’s pillar for cooling the LEDs. The result is a record LED lifespan of over 40,000 hours.
HYBRID POWER is the professional, portable lighting tower of the Towerlux series, with a supporting structure in technical fabric and inflated with pressurized air. Today Towerlux HYBRID POWER is presented by EIL Systems, and is produced with the brand-new and improved EILIGHT technology®
weight from
size
power beyond over
wind gust resistance
power
power
Specialized in the design and production of portable lighiting towers for all industries.
